Shenzhen Sunrise Metal Industry Co.,Ltd,we are manufacturer of tantalum & niobium & tungsten and so on irregular shape products and their Alloys which accroding with your design
products such as :
Niobium C103 alloy,Nb-10%Zr, Nb-47%Ti, Ta-2.5%W, Ta-10%W Shenzhen Sunrise Metal Industry Co.,Ltd
0086-0755-27185042 or 0086-15919982500
QQ: 1957953030
skype :sunrisetantalum
We supply 130 companies with tantalum niobium tungsten products with good price around the world mainly in the Europe and USA
in the USA,we supply for Grandview,Eagle Alloys ,Tricor ,Titan ,Admat ,etc,almost 40 companies .
| 产品图片 |
| 产品特点 |
纯铝线 99.95%以上铝合金板 99.95%铝合金线
标准
GB/T3190-1996
特性及适用范围
1060为纯铝中添加少量铜元素形成，具有极佳的成形加工特性、高耐腐蚀性、良好的焊接性和导电性。1060广泛应用于对强度要求不高的产品，如化工仪器、薄板加工件、深拉或旋压凹形器皿、焊接零件、热交换器、钟表面及盘面、铭牌、厨具、装饰品、反光器具等。
化学成份
铁(Fe)0.35
锰(Mn)0.03
镁(Mg)0.03
硅(Si)0.25
锌(Zn)0.05
钛(Ti)0.03
铜(Cu)0.05
铝(Al)99.6以上
力学性能
抗拉强度 σb (MPa) ≥75
条件屈服强度 σ0.2 (MPa)≥35
试样尺寸：所有壁厚
注：管材室温纵向力学性能
|
| 产品参数说明 |
合金铝板/棒：6061-T6/T651、7020、7072、、6262、6082、7050、6082、6063、7075-T6/T651、5083、5
                                  
热处理工艺
快速退火:加热温度350～410℃;随材料有效厚度的不同,保温时间在30～120min之间;空气或水冷。高温退火:加热温度350～500℃;成品厚度≥6mm时,保温时间为10～30min、<6mm时,热透为止;空冷。低温退火:加热温度150～250℃;保温时间为2～3h;空气或水冷.Shenzhen Sunrise Metal Industry Co.,Ltd,we are manufacturer of tantalum & niobium & tungsten and so on irregular shape products and their Alloys which accroding with your design
products such as :
Niobium C103 alloy,Nb-10%Zr, Nb-47%Ti, Ta-2.5%W, Ta-10%W
We supply 130 companies with tantalum niobium tungsten products with good price around the world mainly in the Europe and
in the USA,we supply for Grandview,Eagle Alloys ,Tricor ,Titan ,Admat ,etc,almost 40 companies .Shenzhen Sunrise Metal Industry Co.,Ltd
0086-0755-27185042 or 0086-15919982500
QQ: 1957953030
skype :sunrisetantalum
|
没有评论:
发表评论